One product for bonding, levelling and reinforced base coat
← Back to products 
Mortars & adhesives
Cm’Armatflex
White-cement mineral powder mortar for bonding, levelling and reinforced base coat in ETICS.
Mixing water≈ 5.8 L / 25 kg
Pot life2 to 3 h
Max. grain size1.3 mm
Adhesion to substrate≥ 250 kPa
Product benefits
Why use it
Compatible with white EPS, grey EPS, XPS and mineral wool depending on configuration
Good adhesion and flexibility
Manual application on mineral substrates
Technical data
Mixing water≈ 5.8 L / 25 kg
Pot life2 to 3 h
Max. grain size1.3 mm
Adhesion to substrate≥ 250 kPa
Bonding≈ 4.5 kg/m²
Base coat≈ 4.0 kg/m²
Compatible substrates / uses
ConcreteAerated concreteBrick masonryBlocksCement / cement-lime renders
Bonding of EPS boardsBonding in the specified configurationsReinforced base coat with glass-fibre mesh
Consumption & packaging
Bonding≈ 4.5 kg/m²
1st base coat pass≈ 2.0 kg/m²
2nd base coat pass≈ 2.0 kg/m²
Minimum dry thickness3.0 mm
Substrate preparation
The substrate must be sound, dry, clean, load-bearing and free of dust, grease, laitance or loose parts. Correct major flatness defects before application.
Installation
Application steps
Prepare a sound, dry, clean, load-bearing substrate.
Mix the powder with about 5.8 L of water per 25 kg bag.
Apply according to use: bonding or base coat.
In the base coat, embed the mesh with a minimum 10 cm overlap.
Conditions & practice
Site information
+5 °C to +25 °CApplication temperature
2–3 hPot life
≥ 10 cmMesh overlap
12 monthsShelf life
Safety / precautions: Cement-based product. Follow the precautions on the sheet and see the SDS for statements H315, H317, H318 and H335.
Read also