Clean, precise render stops
← Back to products 
Profiles & accessories
Render stop profile
Plastic stop profile with stop edge and integrated glass fibre, for clean breaks between two finishes, indoors and outdoors.
MaterialPlastic + glass fibre
Stop / coat thickness3, 6, 10, 15 and 20 mm
Length240 cm
ShadeWhite
Product benefits
Why use it
Integrated glass fibre
Suitable for interior and exterior use
Five stop thicknesses
Technical data
MaterialPlastic + glass fibre
Stop / coat thickness3, 6, 10, 15 and 20 mm
Length240 cm
ShadeWhite
PackagingCardboard box
Compatible substrates / uses
Base coat hardenedClean, dry and even coatAligned edges
Clean stops between two finishesExteriorInterior
Consumption & packaging
Indicative consumption1.00 m per linear metre
Length240 cm
PackagingCardboard box
Substrate preparation
Base coat sufficiently hardened; clean, dry and flat; edges aligned.
Installation
Application steps
Apply base coat over the full width of the mesh strip.
Set the profile in line and press it into the fresh render with a trowel.
Remove excess render with a stainless steel trowel.
Once dry, apply the following render coats.
Conditions & practice
Site information
Textured rendersLevel on the screeding edge
Smooth rendersWork against the edge
StorageFlat, in a dry place
Safety / precautions: If the profile is fitted before the surface base coat, bring the façade mesh up to the edge to ensure sufficient overlap.